16
5.2 Charging the battery
Your Ultra Motor dealer should provide a fully charged
battery upon delivery of your A2B, should this not be the
case, please ensure that prior to its first use, you charge
the battery supplied with your A2B for at least 12 hours.
1. Check the Voltage Selector
switch on the charger to ensure that
it is set to your local voltage (230 V
for Europe).
2. Plug the charger into the wall
outlet, ensuring the charger is
turned OFF.
3. Ensure that the battery Power
Switch 1 is switched OFF before con-
necting the charger to the battery.
4. Rotate the charger port cover to
expose the charger socket 2.
5. Carefully align the connector pins
and connect the charger to the
battery by plugging the connector
into the charger socket.
6. Turn ON the charger using the
ON/OFF switch on the charger.
7. LED Indications:
• The Power LED will illuminate RED
when the charger is plugged into a
wall outlet and the ON/OFF switch is
in the ON position.
• The Indicator LED will illuminate AMBER while the
charger is charging the battery.
• The Indicator LED will change to GREEN when the
battery is fully charged.
8. When charging is complete (the Indicator LED is GREEN),
turn OFF the charger using the ON/OFF switch on the
charger.
9. Unplug the charger from the wall outlet then carefully
unplug the charger from the battery pack by pulling the
connector out of the charger socket.
10. Rotate the charger port cover clockwise or counter
clockwise to cover the charger socket.
11. Your battery is now ready for use.
FUSE
6
7
1
2
3
5
1
2
3
2
1
3
2
4
1
NOTE: The battery will not take a charge if you
connect the battery when the charger is switched on.
