10
4.3 Display
A
– Battery State-of-Charge
Indicator (every symbol
repr/- 20% of the
battery capacity. If the battery
level will drop below 10% the
last symbol will start flashing.
And if the battery level will
drop below 5% the symbols will
switch off completely).
The State-of-Charge will be displayed after a few
seconds after turning on the power.
B
– Speedometer - displays in steps of 0.1 km/h or 0.1 mph
C
– Odometer / Tripometer - displays km or miles pedalled,
this could be your total or your trip distance measured to 10
meter or 0.01 mile.
D
– Lights – activates the backlight on the display and the
lights. Repressing this button will turn on and off the lights
and the backlight on the display.
The A2B is equipped with a daylight sensor, this will
enable the backlight to switch on automatically. The sensor
has a delay of +/- 3 seconds and will only activate when
cycling. Stopping at a traffic light will not interrupt your
backlight, if you stop cycling for more than 5 minutes it will
be switched off automatically.
E
– Info – switches between ODO and TRIP display, the
default display is the ODO or total value. To reset the Trip,
press the Info button for more than 3 seconds.
F
– Mode – adjusts the level of power assistance. The default
level of power assistance is 0.
F
– Mode – switches between km and miles display. To
switch between km and miles press the Mode button for
more than 5 seconds.
