ULTRA-LINK ESSENTIAL Series, User Manual

Page: 3 / 15

Function key introduction:
1. Function button RT.
2. Function button LT.
3. Function button X.
4. Function button Y.
5. Function button B.
6. Function button A,
7. Select / Back button.
8. Start /pause key START.
9. HOME key: X input mode and Direct input mode switch key, only for PC use.
After power on, the default is X input mode. To switch between the two modes
without restarting, press the HOME button for 3 seconds to complete the
switch; when using the PS3/PS4/XBOX360/XBOX One platform, this button is
the menu button.
10. Function button RSB.
11. Programming button Programming, this button is used to set the
programming acceleration (Right Pedal) / brake (Left Pedal) pedal / hand
brake (Hand brake controller) / Shift lever. The above three function keys can
be programmed as any key among A/B/X/Y/LB/RB. Operation method: When
the steering wheel and the host are connected normally, first press the
Programming button, the blue light of the programming indicator is on, press
the button to be programmed, the programming indicator flashes, press the
button to be programmed, the programming indicator goes out, and the
programming is completed. Restore the default operation method: long press
the START and BACK buttons at the same time, wait until the programming
indicator flashes three times, release the START and BACK buttons to
complete the restoration to the default.