Copyright © Ultra Electronics – USSI , Columbia City, IN 46725 USA
HyperSpike
®
MA-Micro Installation and Mounting Manual
90145A-MAN-MAMICRO Rev A
Page 2
CAUTION: EXCEEDING THE MAXIMUM RATINGS OF THE SPEAKER WILL CAUSE
EXCESSIVE DISTORTION AND MAY CAUSE PERMANENT DAMAGE TO THE
SPEAKER AND ITS INTERNAL COMPONENTS.
2.0 MOUNTING
WARNING: WHEN MOUNTING OUTDOORS, MAKE SURE THAT THE SUPPORT
SYSTEM USED HAS THE PROPER WIND LOAD RATING AND COMPLIES WITH
LOCAL STANDARDS AND CODES.
The MA-Micro comes standard with a mast mount (Figure 1). A 10-foot conduit with electrical
leads extends from the system.
The MA-Micro is intended to be pole mounted or suspended by the mast mount. The unit can be
rigidly mounted or hung by the three eyelets.
1) To rigidly mount the MA-Micro, slide it into position with the mast mount around a 2” OD
pipe (not included).
Figure 1: Location of the 2” mast mount
