HyperSpike
®
LineWave Installation and Maintenance Manual
Copyright © Ultra Electronics
– USSI, Columbia City, IN 46725 USA
90243A-MAN-LINEWAVE Rev C
Page 16
Follow these steps to install a LineWave using the Pole Mounting Kit
1. Fasten L Bracket (Part B) of the wall mount kit to the Pole Mount Bracket (Part L) using two
flat washers (Part D), two lock nuts (Part F
), and two 1” long screws (Part J). Repeat process
with second bracket.
Figure 16. 72581B-801 Pole Mounting
– Step 1
2. Fasten the Pole Mount Bracket assembly to pole using straps (Part M).
a. 90243A-803 - L Bracket recommended spacing is 20
” apart.
b. 90243A-804 - L Bracket recommended spacing is
43” apart.
Figure 17. 72581B-801 Pole Mounting
– Step 2
3. Proceed with mounting and adjusting the angle of the speaker unit as described in Section
2.6.
