5
motor
unit
A
3) PREPARATION AND GUIDE TUBES
All motor units of the vertical loop elements require the installation of internal guide tubes in
the upper elements connected to the motor unit "
A"
The guide tube on folded elements is essential so that the tape can slide within the
curve and along the lower element
The guide element is composed of two sections of PVC pipe 2 x 1500mm total length 3 meters.
Join the two PVC sections and tape with common insulating tape.
Insert another junction at one end, this will be helpful to connect the guide tube to the motor
unit (Fig.1-2).
Insert the guide tube into the previously assembled element (Figure 3)
Fig.1
Fig.2
Fig.3
Internal PVC guide tube
junction
junction
tape
tape
tape
