background image

PAGE 2

OWNER'S  MANUAL

TABLE OF CONTENTS

Table of Contents & Warranty.................................................Page 2

Important Notes.......................................................................Page 3

UVC Basics..............................................................................Pages 4-5

System Operation....................................................................Pages 7

 
Product Overview....................................................................Pages 6

X270-1

The manufacturer warrants to the original purchaser of the UVC LED Wand that the product shall be free from 
defects in material and workmanship. However, should this product be proven to be defective, within a (1) year 
period from the original date of purchase, the manufacturer  will, without charge to the purchaser (excluding any 
charges incurred to have the product delivered to the manufacturer), repair or replace any part of the UVC LED 
Wand which the manufacturer agrees to be defective. After the initial 1 year period the manufacture shall repair 
or replace defective products with a nominal processing fee of $30.00 USD.  All warranties apply to the original  
purchaser ONLY. Repairs or replacement of defective modules shall remain at the discretion of the manufacturer.  
All other parts, components, accessories and/or optional equipment are not included in the manufacturer’s 
warranty. 

This warranty is non-transferable

. Request for warranty service from any Factory Authorized Dealer 

must be accompanied with the original purchase receipt or have product registered by authorized dealer 
on manufacturer’s website

.

 Failure to comply with any of these conditions may result in warranty being voided.

 

This warranty does not cover the following: removal and reinstall labor charges, shipping charges, abuse, 
misuse, and/or parts there of. This warranty is void upon modification, repairs, or alterations of any part of the 
product. The manufacturer shall not be held liable for any consequential damages due to breach of this or any 
other warranty, expressed, or implied.  This warranty gives you specific legal rights. Your specific legal rights may 
vary for each region.

WARRANTY (USA & CANADA)

CERTAIN DAMAGES EXCLUDED

  -  The manufacturer expressly disclaims any liability or responsibility for 

incidental damages caused by the product, including economic loss, loss of use of the product, or any other 
costs

 

 relating to the care and custody of the product. The manufacturer disclaims liability or responsibility for any 

consequential damages caused by the product or resulting from its use, including the cost of repairing or 
replacing other property damaged by the product or caused by its use, whether or not the product is working 
properly. The manufacturer does not warrant that the product is fool-safe against human error or misuse.   

PAGE 3

OWNER'S MANUAL

IMPORTANT NOTES

ATTENTION

Please take a moment to review the safety precautions before 
operating your system.

           1.  Use UV goggles and/or full-face shields.
 

2.  Cover any exposed skin

1) 

In rare instances of 

 to UVC light, temporary 

prolonged direct exposure

eye and skin damage has been exhibited, such as cornea injury 
(sometimes referred to as “welder’s eye”) although this generally heals 
after a couple of days. Therefore, safety recommendations with UVC 
LEDs include 

protecting skin (in particular open wounds) and, most 

importantly, the eyes from UVC radiation

.  UV radiation is easily 

absorbed by clothing, plastic or glass. Once absorbed, UV radiation is no 
longer active. When working with open UV radiation, personal protective 
equipment covering all exposed areas is recommended. When working 
around UVC devices, one should:

X270-1 has an additional safety feature to minimize the exposer of UV 
radiation.  Our unique sensor will sense where the UV light is shining and 

 

will turn off if it is tilted upward from the treatment surface to eliminate 
any harm to you. 

3) Please use 5V 1A USB adaptor to charge the unit.  Please fully charge 
the unit before the first use. (it may take up to 3 hours)  

4) In some instances, you may hear the buzz sound during the operation.  

2) Please keep the X270-1 away from the reach of children. 

X270-1

Summary of Contents for X270-1









Reviews: