Ultimatte-9 Operations Manual
March 1, 2000
85
Figure 42: Files Menu
XXXIX. FILES MENU
This menu allows the user to save up to five (5) setups and recall them quickly. These setups could be
current workspace files, or any file loaded from the FILES SAVE/LOAD section on the right side of the
Smart Remote. The operator can also assign up to eight (8) control knob functions to the D1 – D8
locations, in order to make adjustments and save the parameters without leaving the FILES menu.
1. Quick save
Saves the control settings of five different setups.
2. Quick Load
Recalls the control settings of five different setups.
3. Memory Clear
Clears the contents of non-volatile memory corresponding to: Files, Effects, Quick Saves, and GPIs.
VERY IMPORTANT:
1. Window Draw and Paint information can ONLY be saved as Quick Save Files. If saved as
regular or User File, Draw and Paint information will be lost.
2. Regular Internal Windows can be saved to all files.
3. All files are loaded 2 frames after receiving a Load command EXCEPT if Internal Windows
were enabled when these files were saved.
4. Files saved with Internal Windows enabled do NOT have a fixed Load time.
5. Files with Internal Windows enabled should be saved as Quick Save files to guarantee a
load time of 2 frames.
It is possible to create a temporary custom menu for dials (knobs) only in the Files Menu,
to allow the user to change up to eight parameters and save a new file without leaving the
Menu. This custom menu will not be saved as part of a file.
Online [ 1, 2, 3, 4 ] Active ( 2 ) FILE=
MEMORY
CLEAR
D1
QUICK
SAVE 1
QUICK
SAVE 2
QUICK
SAVE 3
D2
D4
D8
D7
D6
D5
D3
QUICK
LOAD 2
QUICK
LOAD 4
QUICK
LOAD 5
QUICK
SAVE 5
QUICK
SAVE 4
QUICK
LOAD 1
QUICK
LOAD 3
UM9-
Files Menu
D9
D10
D11
Input Matrix
FG=1 REF=1
BG=2
AL1= 1
MT=3
AL2= 2
Blue Screen
