CABRA OWNER’S MANUAL
19
•
feeders (if equipped)
–
There are two separate 100# feeders built into the rear of the
vehicle. To fill the feeders, lower the tailgate and raise the cover. There are two
momentary rocker switches on the shifter console which activate the feeders.
•
recovery winch (if equipped)
–
The Cabra is equipped with a 5000# portable
recovery winch. This winch is intended for light duty recovery and is light enough to be
moved and installed on the front or the rear receiver hitch of the Cabra. Simply install in
either receiver hitch and plug it into the Anderson connector adjacent to the receiver. The
remote is then plugged into the connector just above the charge door. (There are two
connectors
–
one is for the recovery winch and one is for the game lift winch. They both
use the same remote). The remote can be held by the driver and operated while driving
the Cabra.
*using a recovery winch can be dangerous
The owner’s manual for the game
recovery winch is found in the supplemental
manuals.
•
game lift system (if equipped)
–
The game lift system
on the Cabra is designed to
aid the loading of game into the rear bed. It is designed to lift a maximum of 700 pounds.
To use the system, first plug the remote into the connector above the charge door and
raise the cab up high enough to access the thumb screws and tube pin for the 2
”
square
telescoping tube below the cab. Loosen the thumb screws, pull out the tube pin, let out
about
10’ of winch rope, slide the 2” tube all the way back
, reinsert tube pin and raise the
cab all the way up. Lower the tailgate and attach the winch rope to the appropriate part
