Page 4
STEP 3B
Release the quick release lever. Slide end clamp onto end of
stand support arm. (NOTE: Make sure end clamp is as far onto
the support arm as possible.)
STEP 3C
Utilizing the leveling bubble, ensure end clamp is level. Secure
by flipping the quick release lever toward end clamp (which
can be tightened, or loosened using a flathead screwdriver).
STEP 3A
Loosen z-knob on end clamp and rotate until bubble level
and riser tube receiver are perpendicular.
STEP 3 – ATTACH CLAMPS AND
ARMS TO STAND
Z-Knob
Support Arm
End Clamp
Quick Release Lever
Quick Release Lever
Flathead screwdriver
Riser Tube
Bubble Level