Page 2
STEP 1 – PREPARE
V-STAND® PRO OR IQ-3000
OR
Back End
Back End
End
Cap
Sleeve
Sleeve
STEP 1A
Identify the back end of
the support arm of the
V-Stand Pro.
STEP 1B
Slide the support arm
back to make room for
second tier assembly
by lifting it up at an
angle, then sliding
it down until fully
extended. Lay arm flat
onto collar.
STEP 1C
Using a flathead
screwdriver, carefully
detach end cap.
STEP 1A
Identify the back end of
the support arm of the
IQ-3000.
STEP 1B
Slide sleeve forward to
make room for second
tier pro assembly.
STEP 1C
Using a flathead
screwdriver, carefully
detach end cap.