ULTIMATE SPEED ULGD 10 A1, Translation Of The Original Instructions

Page: 41 / 170

40 GB/IE
battery exhibits the same tempera-
ture as the environment.
z
Using the device
z
Connection
Note:
Always observe the instructions
from the vehicle manufacturer or
the battery manufacturer.
Charging using the battery clamps:
„
Disconnect the minus pole
connection cable (black) of the
vehicle from the minus pole of the
battery first before charging and
maintenance charging if the bat-
tery is continually connected in
the vehicle. The negative pole of
your battery is usually connected
to the car body of the vehicle.
„
Then disconnect the plus pole
connection cable (red) of the
vehicle from the plus pole of the
battery.
„
Connect the output cable with the
plug
15
o the connecting cable
with clamps
18
.
„
Only then connect the “+” pole
quick-contact connection terminal
(red)
19
of the vehicle battery
charger
1
to the “+” pole of the
battery.
„
Connect the “–” pole quick-con-
tact connection terminal (black)
21
to the “–” pole of the battery.
„
Connect the mains cable
12
of the
vehicle battery charger
1
to the
socket.
Charging using loops:
„
The connecting cable with
loops
17
must be permanently
connected to the battery.
„
Disconnect the battery from the
vehicle. Loosen the nut on the
battery’s positive terminal (red).
Now insert the red loop
13
under
the nut connected to the battery’s
positive terminal, and then
retighten the nut. Make sure that
the loop
13
does not slip when
tightening the nut.
„
Repeat with the black loop
14
on
the battery’s negative terminal.
„
Afterwards, reconnect the battery
to the vehicle.
„
Plug the cover cap of the connect-
ing cable with loops
16
over the
contacts of the connecting cable
with loops
17
. When the charger
is not being used, this must
always be carried out, in order to
prevent a short circuit.
„
Remove the cover cap
16
of the
connecting cable with loops
17
,
before you start charging.
„
Connect the output cable with the
plug
15
with the connecting cable
with loops
17
.
„
Connect the mains cable
12
of the
vehicle battery charger
1
to the
socket.
Before use / Using the device