GB
13
Operation / Maintenance and care / Warranty and service information
Alternator test function
Connect the mains cable
7
of the car charger
to the socket.
Attach the red connection terminals
5
to the
plus pole of your battery. (The plus pole is
marked by a "+" and a red mark.)
Attach the black connection terminals
6
to the
minus pole of your battery. (The minus pole is
marked by a "+" and a black mark.)
Set the function alternator (LED next to the alternator)
via the button
1
. A %-value is displayed. Start the
engine. If the %-value rises with the engine running,
the alternator will charge the battery. If the %-value
drops or remains the same, there is a problem with
the alternator, the connection or the battery.
Disconnect the device from the mains current.
Disconnect the "–"-pole quick contact-
connection terminal (black)
6
from the "–"-
pole of the battery.
Disconnect the "+"-pole quick contact-
connection terminal (red)
5
from the "+"-pole
of the battery.
Replacing the fuse
The fuse of the car charger may be damaged,
e.g. by a device defect, overload, etc.
Before replacing the fuse, pull the mains
cable
7
.
Remove the cover of the fuse
4
by depressing
it slightly on the side.
Unscrew the fuse
4
with a matching
open-faced wrench and attach the new fuse.
Screw it on subsequently and replace the
cover
4
.
Note:
If you need a new fuse, contact our
service (see chapter with notes on guarantee
and service processing).
Maintenance and care
Always pull the mains cable
7
from the socket
before you perform any work at the car charger.
The device is maintenance-free. Deactivate the
device. Clean the metal and plastic surfaces of
the device with a dry cloth.
Never use any solvents or other aggressive
cleaning agents.
Warranty and service
information
Creative Marketing
Consulting GmbH warranty
Dear customer,
The warranty for this equipment is 3 years from the
date of purchase. In the event of product defects,
you have legal rights against the retailer of this
product. Our warranty, outlined below, does not
limit your statutory rights.
Warranty conditions
The warranty period begins on the date of purchase.
Please retain the original sales receipt.
This document is required as your proof of purchase.
Should this product have a material or manufacturing
error within three years of the purchase date, the
product will be repaired or replaced – dependent on
our choice – by us at no cost to you. This warranty
service requires that you retain proof of purchase
(sales receipt) for the defective device for the three
year period and that you briefly explain in writing
what the fault entails and when it occurred.
If the defect is covered by our warranty, we will
return the repaired device or a replacement thereof.
A repair or exchange of the device does not start a
new warranty period.
Extent of warranty
The device has been manufactured according to
strict quality guidelines and meticulously examined
before delivery.
Summary of Contents for ULG 12 B3
