Ultimate Jets
B300F User manual rev5.
1st June 2014
3
1. Directions for safe operations
1.1. General safety instructions
The jet modeler in the USA shall comply to the AMA rules for turbine
models operations. We require our customer to reading and complying
with the docs and regulations enclosed on this page:
http://www.modelaircraft.org/documents.aspx#Turbines
The operation of any jet engine can be dangerous. This also holds true for
the
B300F
. During operation, the jet efflux and parts of the jet nozzle
become very hot; the nozzle can reach up to 700 °C. In addition, the
turbine fans do reach very high rotation speeds, which leads to extreme
tensile loads and temperatures. Therefore, it cannot be excluded that parts
of a failing turbine fan wheels or broken fans could strike through the
housing which can lead to damage and even injury or death.
Study the operation mode and the dangers of operation before using a jet
engine. In case you have no experience with the operation of gas turbines
and jet engines, instruction by an experienced person, especially before
initial operation, is mandatory. Errors in mounting and operation of a jet
engine can lead to damage, injury, or death.
Follow AMA regulations concerning aircraft, the operation of jet engines,
and the handling of combustible liquids and gases. You are exclusively
responsible to have sufficient insurance when operating aircraft. You are
also responsible to protect other persons from injury and danger.
Operating personnel and their assistants must be in best physical and
mental condition and pay full attention to the operation.
This engine must only be used for unmanned operation in R/C aircraft.
The instructions in this manual must be exactly followed.
