Installation of filter components
Keep the air guiding block of the stainless
steel filter assembly on the same side as
the dust container inlet,and install the
stainless steel filter assembly into the
dust container from the top of the dust
container. Note that the limit slot must
be aligned with the dust container limit
bar.
Put the filter sponge into the bottom of
the HEPA cover. The filter sponge needs
fixing completely with 5 slots.Otherwise
it will affect the filtering effect.
Air Guiding Block
Limit Bar
Inlet
Limit Slot
Fixing Slot
Keep the side of the HEPA assembly
with the rope upward and put it into
the dust container from the top.
Please note that the limit slot of the
HEPA assembly must be aligned with
the dust container's limit bar.
Limit Bar
Limit Bayonet
Installation of the dust container
Snap the dust container into the main
unit. Please note that the snap must be
in place.
Push the bottom of the dust container
in the direction shown in the picture,
until you hear a click.
①
②
