3.4.
Cleaning and maintenance
a)
Always unplug the device before cleaning it.
b)
Use only non-corrosive cleaners to clean the surface.
c)
After cleaning the device, all parts should be dried completely before using it
again.
d)
Store the unit in a dry, cool place, free from moisture and direct exposure to
sunlight.
e)
Do not spray the device with a water jet or submerge it in water.
f)
The device must be regularly inspected to check its technical efficiency and
spot any damage.
g)
Do not leave the battery in the device if it will not be used for a longer period
of time.
h)
Clean the filter regularly. First clean it with a brush, then wash it under running
water.
i)
Dirt should be emptied from the container regularly.
j)
Regularly clean the dirt container under running water.
k)
If the suction power is reduced, the vacuum cleaner does not pick up any more
ash and the container is empty, remove and clean the filter. If the filters are
clean and the vacuum cleaner is still not working properly, clean the inside of
the aluminum tip and the suction tube.
SAFE REMOVAL OF BATTERIES AND RECHARGEABLE BATTERIES
1.5V AAA batteries are installed in the devices.
Remove used batteries from the device using the same procedure by which you
installed them.
Recycle batteries with the appropriate organisation or company.
DISPOSING OF USED DEVICES
Do not dispose of this device in municipal waste systems. Hand it over to an electric
and electrical device recycling and collection point. Check the symbol on the
product, instruction manual and packaging. The plastics used to construct the device
can be recycled in accordance with their markings. By choosing to recycle you are
making a significant contribution to the protection of our environment.
Contact local authorities for information on your local recycling facility.
