23
KSP SHAFT PLATFORM
4.1.2.
GP box out
The box is placed from the concrete face of the
formwork and fastened with a short pin 0.35m and
hexagonal nut 15. To do so, a 18mm hole has to be
drilled through the plywood.
This part remains in the concrete and only removing
the short pin 0,35m and stripping the formwork a few
millimetres from the wall, the formwork set can be
moved and lifted.
Once the formwork set is lifted for next pouring, the
box used in the previous pouring can be recovered
from the cone recovering platform with the short pin
0.35m.
4.1.3.
Folding bracket
In this case, the platform horizontal walers rest directly
on a hinged plate included in the Folding bracket.
This Folding bracket is fixed with a M24x80 bolt to the
cone
DW15/M24
previously left in the wall together
with its fixed anchor.
Ensure the full threaded of the rod on the
cone and fix anchor.
