manualshive.com logo in svg

Ulma BMK-170, User Manual

Share
Download
Ulma BMK-170 User Manual Download Page 19

19 


BMK CLIMBING BRACKETS

 

2.2.16.

 

Bottom Support (1991487) 

This accessory is placed on the vertical waler of the 

main platform and on the waler MK used for the 
cone recovery platform. 

   

 

 

 
 

2.2.17.

 

Handrail Head MK (1990570) 

Tube which serves as support for the couplers of the 
climbing bracket bracing and for the walers of the 
cone recovery platform. 

 

 

 

 

2.2.18.

 

Axial node M2-D20 MK (1991458) 

This part is a joint used for the creation of the 
platforms (pouring/ intermediate/ cone recovery). 
 

 

 

The Axial Node M2-D20 MK is bolted to the waler 

MK according to the pouring height. 
 

 

 

 
 

 
 

Bottom Support 

(1991487) 

2 Bolts M16x90 (0241690) 

2 LockNuts M16 (0241608) 

2 Pins E20x70 (0252070) 
2 Cotter Pins R/5 (0250000) 

4 Bolts M16x90 (0241690) 

4 LockNuts M16 (0241608) 

2 Bolts M16x90 (0241690) 
2 LockNuts M16 (0241608) 

Summary of Contents for BMK-170













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands