4
On JVC HD camcorder
If you have connected your JVC HD camcorder before to your
computer, check the
Device Manager
to see if your
camcorder is detected as a
DV device
(left image below) or
JVC tape device
(right image below).
If the camera is detected as a DV device, follow the procedure
on the next page to switch it to MPEG-2 mode. If the
camcorder is detected as a JVC tape device, you don't have to
do the procedure on the next page. You can directly run Video
Capture and start capturing your video. (For details on how to
capture video, see
“Capturing HDV/HD video using Video
Capture” on page 6
).
If you have not connected your JVC HD camcorder before to
your computer, follow the procedure on the next page starting
from
step 5
.
DV mode
MPEG-2 mode
Note:
To switch the JVC HD camcorder to MPEG-2 mode, you
only have to do the procedure on the next page once.
