Ukoke UGS01, Operator'S Manual

Page: 13 / 17

SPRAYING HOME-AND-GARDEN
CHEMICALS
See Figures 10 - 11.
Install the battery pack into the tool.
Depress the ON/OFF button to start the motor.
The sprayer may be operated with the handle
resting in the handle storage area as shown in figure
10, or you may remove and hold the handle as shown
in figure 11. Aim the sprayer nozzle directly at the
plants or objects you wish to spray.
NOTE: Make sure to stand far enough fromthe
object being sprayed to prevent the spray from
splashing back onto you.
Depress the trigger to start the spray. Release the
trigger to stop the spray. Always empty, clean, and
drain the tank after
every use as directed in the Maintenance
section.
10
Thoroughly clean the chemical sprayer before
storing or before switching to a different chemical.
See Cleaning the Unit later in this manual.
When you are finished with the sprayer,
thoroughly wash your hands and any area where
skin has been exposed to the spray.
OPERATING TIPS
Never point the spray end of the wand at
yourself or others.
Avoid spraying on windy days. Spray can be
accidentally blown onto plants or objects that should
not be sprayed.
Never spray in the direction of people or
animals; always spray downwind.
Especially in warmer weather, spray in the
early morning or late afternoon. Excessive heat can
evaporate the spray before it settles. Never smoke,
eat, or drink while operating the sprayer.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.