CONNECTING THE SPRAY WAND TO
THE HANDLE
See Figure 2.
Insert the spray wand into the the handle as shown.
Slide the o-ring down until it touches the handle. Thread the
cap onto the handle and tighten securely.
Rotate the nozzle until it is aligned with the handle
(pointing down) and ready for use.
Slide the nut onto the cap and tighten securely.
Pull on the spray wand to be certain it is properly
secured.
Place the assembled handle into the handle storage area.
8
ATTACHING THE HOSE
See Figures 3 - 4.
To attach the hose to the tank:
Slide the nut on the hose away from the hose end.
Insert the hose end into the opening on the tank as
shown. Make sure the connection is secure.
Slide the nut over the opening and hose end.
Handtighten. Do not overtighten.
To attach the hose to the handle:
The hose comes preassembled to the handle. If it
becomes loose, follow the instructions below. Thread
the cap onto the handle and tighten securely.
Slide the nut on the hose away from the hose end.
Insert the hose end into the opening on the cap. Make
sure the connection is secure.
Slide the nut over the hose and cap. Hand
tighten. Do not overtighten.
APPLICATIONS
You may use this product for the purpose listed below:
For use with most consumer grade home and
garden chemicals, such as insecticides,
fungicides, weed killers, and fertilizers.
Summary of Contents for UGS01
Page 4: ...A Adjustable nozzle buse réglable boquilla ajustable B Wire fil alambre ...
Page 9: ...6 ...
Page 16: ...13 ...
