UK-electronic Unicord SuperFuzz Clone, Build Manual

Page: 7 / 11

Notes to the mechanical structure:
The small tabs at the potentiometers are easily broken off with pliers (see illustration on page 2).
The 10.5mm steel washers are inferior to the jacks. The 7.4 mm for potentiometer As knobs
which you should use with a max. diameter of 24mm, when a pre-drilled 1590B enclosure size is
used. The holes in the jacks sit 14mm from the bottom of the case, the DC jack 12.5mm from the
bottom.
The 10K trimmer should be to balance the symmetry, but no differences were apparent. Neither
left nor to the right stop.
For self-drill:
Potentiometer: 7mm
Jacks: 9.3mm
3PDT switch: 12mm
DC jack: 12mm
LED bezel and SPDT switch: 6mm
If clean up and properly wired, the effects device should work immediately. For any questions we
are always available.
2013 © UK-electronic