UJETA CARE, Operating Instructions Manual

Page: 17 / 80

DisMantling
After use, the water container is dismantled in the reverse sequence. Pull the
container up and off, using the handle. To do this, hold the base plate in positi-
on with your foot and hold the filter. Carefully remove the fleece mat pre-filter
and knock off any sizeable dirt. Empty out any remaining water. Unscrew and
clean the other parts.
Some residual water will be discharged from the UJETA water filter and the Car-
tridge L. This is a sign of the fineness of the filter and of its functional efficiency.
Similarly, turn the base plate over and allow the residual water to drain off.
Next, loosen the hinges and clip them back into place under the base plate.
Place all parts into the water container and close the cover.
tHe systeM is now reaDy for transPort.
aDDitional tiPs
• Make sure the ground on which the pump is placed is level, as otherwise the
water container could tip over during assembly or pumping.
• Stabilise the water container during pumping by placing a foot on the base
plate.
• Use a clean vessel or bottle for taking off the filtered water.
The adjustable discharge on the filter housing can be rotated through 360
degrees. Set it in the right position before installing.
ga_care_as_print_Layout 1 22.10.17 18:06 Seite 17