7
Affixing the EPDM rubber
• To prevent displacement of the rubber EPDM
on the QL Mini during transportation to the da-
maged area, affix the seal on both sides of the
stainless steel sleeve and at the ends above
the locks with a drop of super glue.
• Warning: Under no circumstances should
the super glue drip onto the metal overlap,
otherwise it will not longer be possible for
the sleeve to expand.
• Warning: If the rubber is not properly
affixed, there is a risk that it might bunch
up at a constricted point in the pipe without
you noticing.
position: 6 o‘clock
position: 12 o‘clock
