5
2. Quick-Lock FLEX system description
2.1. Intended Use
The sleeve (QL Flex) was designed for use with radial offsets up to 2.5 cm
and/or deviations up to max. 10°.
With QL Flex, you can usually adjust or repair offsets or deviations from the
pipe axis without any further preparatory work.
2.2. Suitability and Materials Used
The system is manufactured using V4A stainless steel grade 1.4404 (AISI 316L)
and an EPDM compression seal.
These materials are extremely durable in municipal waste water.
The suitability of these materials for use in industrial or contaminated
waste water is yet to be verified.
• Use the technical Data Sheet (see Appendix 1) to choose
the right and most suitable QL Flex for your particular application.
• For more information on the suitability of the products please see
Chapter 1.6 of the Manual.
