background image

Zubehör 

N

12

13

Before the thrill of anticipation overtakes you and you begin
assembling your Mechanica M2, we request that you carefully
read the following information. 

Your Mechanica M2 is a precision table clock

*

, which means the 

individual components have been manufactured with the utmost
precision at very low production tolerances.

In order to avoid damaging the somewhat sensitive components, 
we recommend you use great care in unpacking and assembling 
the parts.

The sequence of steps explained in the instruction manual was 
designed to save you unnecessary difficulty and ensure that all 
goes smoothly.

Assembly instructions for numerous other possible options are listed
as »variations« near each of the steps and clearly marked as such so
you can differentiate them.

A clear listing of the accessory equipment with short descriptions 
currently available to technically and visually upgrade your 
Mechanica M2 can be found at the end of this book on pages 86-87. 

In the assembly instructions and explanatory remarks, we have 
decided to refrain from using technical jargon as far as possible.
Technical words that could not be avoided are explained in the 
glossary at the end of this book. These are marked with an asterisk

*

in the text.

The assembly of your Mechanica M2 is clearly divided into
three levels and organized into numbered compartments.

The corresponding numbers are also specified on each of the 
components, tools, and auxiliary accessories so they can be easily
located. An overview of the levels’ numbers can be found on the 
packing list and the illustration at right.

Important Information 
before Beginning

Safety Precaution:

Your precision 

table clock kit 

contains quickly

moving parts. 

In order to avoid 

danger of injury, 

please take note of all 

safety precautions 

and advice!

Top Level

Center Level

Lower Level

P

Base plate

P

Seat-board

P

Lid of secret compartment

P

Inlay tile for secret compartment

P

Front side bars (one with drilled hole for fastening hook)

P

Back side bars (each with two glass grooves)

P

Assembled door

P

Door seal

Summary of Contents for Mechanica M2



























































Reviews: