UHP-1200 OUTDOOR SATELLITE ROUTER
GENERAL DESCRIPTION AND INSTALLATION GUIDE, v3.2
© UHP Networks Inc. 2015
6
www.uhp.net
INTRODUCTION
This document presents a general description of the UHP-1200 series satellite routers and is intended for
familiarization with the system capabilities and specifications. This manual is applicable to all the key modes of the
router operations.
Required level of qualification
This manual is intended for engineering personnel operating VSAT networks. Such specialists should have
adequate educational credentials in the field of electronics and sufficient experience and skills in data networks
administration and satellite systems.
Document version and applicability
UHP VSAT platform is based on the universal satellite router UHP, which is available in different fully-compatible
hardware modifications. UHP satellite router is a basic element of any network architecture and can be used in any
combinations and at any hierarchy level. Router functional capabilities and its operating modes are determined by
the installed software and its configuration.
This manual is applicable to all UHP-1200 series outdoor satellite routers (previously known also as UHP-1000-OD)
with software release 3.2 or higher. When ordering this document, please specify its ID: [UHP.OR32.EN].
Figure 1 Structure of UHP Manuals
Copyright
The content of this document is the intellectual property of UHP Networks Inc. (referred to below as UHP
Networks). Copying or quoting this description as a whole or of any part of it without a written permission from
UHP Networks is prohibited.
Network
Engineering
TDM/TDMA
Terminal
SCPC
Modem
Hubless
TDMA
Station
UHP-1200
UHP-8000
UHP-200
UHP-IFS
NMS
System Level
(Network engineering guide)
Hardware Level
(Installation guide and
specifications)
Service Level
(User manual)
