UHP-1200 OUTDOOR SATELLITE ROUTER
GENERAL DESCRIPTION AND INSTALLATION GUIDE, v3.2
© UHP Networks Inc. 2015
10
www.uhp.net
2.
OPERATIONS
2.1
Operational limits
Table 1 Operational limits
#
Parameter
Limits
Minimum
Maximum
1
Router DC Input voltage
23 VDC
25 VDC
2
Output current at Tx Out interface
-
2 A
3
Input voltage on the Tx Out interface
-
24 V
4
Output current at Rх SCPC or RX TDMA
-
0,75 А
5
Input voltage on other interfaces
18 V
6
Operational temperature
0
С
+40
0
C
7
Relative humidity (@ 25
0
С)
0%
90%
8
Atmospheric pressure (mm Hg)
720
770
9
Mechanical impacts (acceleration with an amplitude
not exceeding 1,25 mm):
- in a range 0,5 – 15 Hz:
- in a range 15-40 Hz:
- in a range 40-300 Hz:
2,45 m/s
5,88 m/s
14,7 m/s
2.2
Preparation for use
2.2.1
Unpacking
Before opening the packaging please check a safety of transport container. If there is any visible damage of
packaging you should keep it as long as the delivered equipment will be properly tested.
2.2.2
Installation
UHP-1200 Router is designed for installation on any flat, stable surface or on an antenna mount with the included
universal installation kit. The router should be installed in a place protected from direct sunlight.
Table 2 Pinout of 8P8C LAN interface (RJ45)
Пин
Назначение
1.
Rx +
2.
Rx -
3.
Tx+
4.
DC +
5.
DC +
6.
Tx -
7.
DC -
8.
DC -
2.2.3
Connecting to external devices
All wire connections must be performed before powering up the router. Cable connectors should be screwed to
the router without use of any mechanical instruments. Please, avoid excessive force when connecting IF cables.
WARNING!
D
O NOT CONNECT OR DISCONNECT ANY CONNECTING CABLES TO THE ROUTER WITH THE POWER ON
.
T
HIS
CAN LEAD TO A FAILURE OF THE ROUTER AND CONNECTED DEVICES
.
