safety shoes
Umbrella Type T, TS, TX, TXS, TLX, TXV, MMA
Installation of the umbrella with the in-ground sleeve/
base plate or mobile base without hinge:
(Step 1)
• Loosen the fixing- and clamping screw on the
upper sleeve just enough so that the mast can
easily slide in.
• Slide the upper sleeve over the umbrella mast
and tighten the fixing- and clamping screw
hand-tight
(Picture a)
• Only after opening and aligning the umbrella
you can fasten the fixing- and clamping screw.
(see next steps)
• Remove the foil and the protective cover.
• Mount the top plate to the top of the umbrella.
Please note that the umbrella must not be
laid down anymore.
(Step 2)
• Bring the umbrella to an upright position.
For setting up with a in-ground and upper
sleeve without hinge we recommend 2-3
persons. (Picture b)
Important: Do not lean the umbrella against
any objects!
• Fix the upper sleeve immediately to the
in-ground sleeve with the sleeve screws.
While doing so, the umbrella needs to be
secured by a second person.
Important: The umbrella must never lie
on the top plate when uninstalled!
Picture b
Picture a
straighten
straighten
straighten
fix
packaging carton as
protective underlay
inground sleeve
20
