CX6182
P
RODUCT DESCRIPTION
11
3.5
Management accessories
The components of the Clex prime system described below are used to manage a
Clex prime locking system.
3.5.1
CX6530 Keyvi management software
The locking system can be managed centrally and conveniently from the PC using
the Keyvi management software for Clex prime. Even complex locking programs
can be easily created, monitored and maintained using the software.
3.5.2
CX6510 service device
The CX6510 service device is used for programming the locking system.
Information can be exchanged between the Keyvi management software and
locking units using the service device. The information includes, for example,
authorizations, events or settings for the locking units. In case of EM and
HITAG1, the keys can also be programmed using the service device
.
3.5.3
CX6522 ClexTouch
ClexTouch is software that runs on handheld computers or laptops with Windows.
It can be used to conveniently configure the locking system and (along with a
corresponding wireless USB stick) the relevant data can be sent directly to all the
locking system components of Clex prime that are provided with a radio chip.
3.5.4
CX6520 Programming station
The programming station is an optional addition to the Keyvi management
software and the CX6510 service device in order to program the key
conveniently. In conjunction with MIFARE
®
or LEGIC
®
transponders, the
programming station is always required to program the key. The programming
station is connected to the PC using a USB cable.
3.5.5
Special keys
Using the service key, a user identifies himself as an administrator of the locking
system. If this key is held in front of a locking system component, then the
respective component goes into service mode, where it is possible, for example,
to create or change authorizations, make settings or to read the event log.
A sub-service puts an already personalized locking unit into service mode. These
sub-service keys have authorization only for certain areas or for specific times (for
example, for a locking system with several houses and individual management).
Sub-service keys cannot be used to personalize new locking units for the first time.
Only existing and personalized locking system units can be put into service mode.
Service key
Sub-service keys
