Ugur USS 100 DSCL, Operating Manual

Page: 26 / 115

EN EN
WARNING!
D -USING YOUR COOLER
Using digital thermostat
For Carel Thermostat;
If the product you’ve purchased is equipped with a digital thermostat, please pay attention to the following matters.
Digital thermostats are factory set and do not require any setting. You can change the thermostat setting as shown
below.
Digital thermostats contain many programs (such as eco mode, night mode). If you believe that there is a problem in
your product related to the operation or cooling, please consult to authorized service.
Error codes given by the digital thermostats are under the troubleshooting title. When you encounter these error codes,
stop thermostat alarm and call Authorized Uğur Service.
Temperature is increased by pressing this button after
pressing set button.
It allows setting the device temperature. It is activated
when set button is pressed for 2-3 seconds.
Temperature is decreased by pressing this button after
pressing set button.
Programming key. Only used by service personnel.
Product on/off function. Temperature is increased by
pressing this button after pressing set button simul-
taneously.
Ensures manuel defrost of the product. Temperature
is decreased by pressing this button after pressing set
button simultaneously.
It allows setting the cooler temperature. It is activated
when set button is pressed for 2-3 seconds.
Turns on/off your cooler.
Manuel defrost.
Mutes alarm.
Shifts to economic mode and night mode.
Temperature settings of your product have been set in our factory in a manner that operates under the most suitable
conditions.
Protection temperature of the food are observed from the thermometer (optional) equipped in your cooler and set
via the thermostat. (Picture 16) However storing the factory settings is the most appropriate one.
Internal temperature of your cooler can be adjusted by rotating the thermostat button (Picture 17). When the
thermostat is at position "7", internal temperature of the refrigerator will be at the lowest level. Internal temperature
of your product can be set b1 and +10°C.
D -USING YOUR COOLER
Setting internal temperature of your product
Thermostat operation is different only in USS 374 DTK SRP Vine Cooler. In these products, you will get the
coolest temperature when the thermostat is set as position 1 and highest temperature when it is set as
position 7.
If your wine cooler is equipped with a fan;
The temperature inside the cooler in position 1 is about 10°C.
The temperature inside the cooler in position 7 is about 18°C.
If your wine cooler is not equipped with a fan and static;
The temperature inside the cooler in position 1 is 4-5°C
at the bottom, 10°C in the medium and 15°C in the top section.
The temperature inside the cooler in position 7 is 15°C
at the bottom, 18°C in the medium and 22°C in the top section.
Picture 17
Picture 16
50 51