Ugur UMD 1450 D DF IZMIR, User Manual

Page: 21 / 32

User Manual
l
– General Store Type Freezers and Fridges
21
EN
WARNING
ELECTRIC SHOCK
Never wash this equipment.
5.3 – GLASS CLEANING
For decreasing the energy
consumption;
•Do not place hot food inside the
equipment.
•Do not keep the cover of the
equipment open for a long time.
•The equipment must be placed
at a location where there is no direct
sunlight.
•For discharging the heating inside
the part where the cooling components
of the equipment are located, the screens
covering the cooling group must not be
covered with an object. Otherwise,
the cooling process of the equipment
extends and the energy consumption
increases.
•If you think that there is frost deposit
in your equipment, please perform
defrosting operation (Chapter 5.1).
•Leaving the cover of the equipment
may cause frost deposit inside the
equipment. In order to prevent frost
deposit, when you do continuous loading,
perform manual defrosting operation
on your equipment after the loading
(Chapter 5.1).
5.4 – LOADING CAPACITY
•Make sure that the foods loaded in
the equipment are below the loading
line (Image I I ).
• Do not place products in the
equipment before reaching the
sufficient storage coolness.
• Products placed in the equipment
in unpacked condition or in nylon bags
with holes might cause fluid leakage.
The leakingfluid might cause problems
such as corrosion, staining and cracking
on the plastic parts, losing the hygiene
conditions inside the equipment, forma-
tion of odour, reproduction of bacteria,
etc.
•
When you do continuous loading,
perform manual defrosting operation
on your equipment after the loading
(Chapter 5.1).