Ugur UMD 1450 D DF IZMIR, User Manual

Page: 11 / 32

User Manual
l
– General Store Type Freezers and Fridges
11
EN
NOTE
Packaging materials may
be dangerous for children.
Preserve the packaging
materials in a place where
children cannot reach.
Packaging materials are
suitable for recycling and
may be reused. Thus, dispose
of the package materials
in accordance with waste
disposal instructions or
by consulting to your
municipality and in a way that
will not damage environment.
3.3 – INSTALLATION
3.3.1– ADJUSTMENT OF
ADJUSTABLE STAYS
Balance the device by way of a
water gauge with regards to the
width and length. You may carry out
the balancing with the help of the
stays on the device. You may adjust
the balance with the help of a key
because of the device’s weight.
As is shown in Image C C , it may be
adjusted to a level you d esire and
you may raise it to 13 mm in maximum.
Wear protective gloves while carry
out the balancing operation.
3.3.2– MULTIPLE DEVICE USE
LAY-OUT POSITIONS
3.3.2.1– STAND ALONE USE
Pay attention that there is at
least 150 mm distance between the
wall and the device (back part). The
device may have a contact with the
wall on the side. A visual regarding
the device’s lay-out is presented on
Image D D .
3.3.2.2– SINGLE LINE ARRAY
Pay attention that there is at least
150 mm distance between the wall
and the device (back part). In case you
will line up more than one market
fridge side by side, it is not necessary
to leave an air gap between them.
A visual regarding the device’s
lay-out is presented on Image E E .
3.3.2.3– SUCCESSIVE ARRAY
In case you will place more than
one market devices back to back, you
shall definitely use special profiles
and lids. Thus, by means of the
profiles and lids, there will be at
least 150 mm distance between two
back-to-back market devices. A visual
regarding the device’s lay-out is
presentedon Image F F .
*You may all the necessary original
spare parts and island assembling guide
from Authorized People.