BYNTO LTD
Esteem Alloy Transit Wheelchair Instructions
Page 3
www.bin-to.co.uk
Warning
The Transport Chair should not be operated without the assistance of an attendant
How to Operate Your Transit Wheelchair
Your wheelchair dealer can assist you in making adjustments and provide you with operational
information.
To open the chair, tilt to one side and push down on seat rails.
Lift back support to upright position. The lock to secure the back will engage automatically. To fold
down and store, press levers on locks simultaneously and carefully fold down the back support.
To attach footrests, align the holes on the footrest arm with the pegs on the frame of the Transit chair.
(See Diagram)
To adjust the length of the footrests, loosen the bolt on the telescopic tube shaft. Tighten securely after
adjustment. The lowest part of the footrest should not be less than 2 1/2 inches from the ground to
permit proper clearance.
To remove the Swing-away footrest, release the lock. Swing outward and rearward. Simply lift up and
off to remove the footrest.
To lift the arms press lever and lift
To fold the wheelchair lift the footplates to the vertical position or remove them.
Grip the front edge of the seat upholstery and pull upwards the wheelchair will come
together.
To remove rear wheels
To remove back wheels, push in axle button and while depressed, pull wheel away from frame. To
install, simply push wheel onto axle until you hear a “click”. Pull on wheel to be sure it is locked into
position.
