Hot
Warm
Cold
Normal
9
10
！
If the drawing is changed, no information anymore.
To protect the control panel, the interval time of power on and off should be not less than 30 seconds.
Instruction
of
the
washer
operation
panel
Press the button, select proper water
level according to the quantity of clothes.
, and light and flash in turn
The indicator lights move at each press
on the button
.
Water level
After program selection, press the button to
start.
Press the button to pause in the course of
operation, press the button again, the program
continues till the program is finished.
Start/Pause
On & Off
power
Power
Delay
Press
the
button
to
preset
delay time. Less than
24 hours, on each press, the delay-time is added
one hour; more than 24 hours, the delay-time is
added 6 hour on each press, up to 48 hours. The
preset indicator comes back to origin status after
that. If keep pressing the button, the delay time
will automatically change.
Program
Can select fully automatic program like:
Child lock
Press the “Water level” and “
”
at the same time to lock buttons on
control panel.
Spin
Press the “Water level” and “
”
at the same time again to unlock
buttons.
Spin
Press the button to
select any single
procedure, or any
of
procedures.
combination
Function
Temperature
Press the button to set the wash mode of injection “HOT”
or “COLD” water for wash. When the lights of “HOT” or
“COLD” are light at the same time, both “HOT”water and
“COLD” water are injected.
Press the button you can select “HOT”, “COLD”and
“WARM” water to be used.
Normal(light)
Quick(flash)
Jeans(light)
Anti-crease(flash)
Air dry(flash)
Silk(light)