Instructions for use (rev 110121)
PC 30
UGIN DENTAIRE
17
-
Use only
genuine spare parts
. The use of non-original spare parts voids any warranty for your
device.
-
Do not introduce stranger objects inside
the unit during the maintenance operations. It is
forbidden to modify the material without authorization.
-
Do not execute different operations of maintenance
from those brought back in the manual.
Whichever operation not included in this manual, can involve risks.
-
For whichever information concerning installation, maintenance and use, contact the
customer’s service UGIN DENTAIRE
.
1.3.
WASTE DISPOSAL
Observe the waste disposal regulations for electrical and electronic equipment: do not dispose of with
household waste.
The unit is subject to Directive 2012/19/EU on waste electrical and electronic equipment and to the laws of
the country in which it is being used, and must be disposed of in accordance with applicable regulations.
The insulating material are composed of high temperature insulation wool (alkaline earth silicate), a
substance not classified as dangerous according to Regulation 1272/2008/EC (CLP), and classified as non-
hazardous waste for disposal. However, such a waste is normally dusty and so must be properly packaged
before for disposal. Check any national or regional applicable regulations.
2.
EC DECLARATION OF CONFORMITY
The equipment’s EC declaration of conformity is provided as appendix of instructions for use.
Content of the declaration EC:
▪
Name and address of the manufacturer:
UGIN DENTAIRE. 25 rue de la Tuilerie. 38170 SEYSSINET-PARISET
–
FRANCE
▪
UGIN DENTAIRE declares, on its own exclusive responsibility, that the product:
-
Burnout furnace
PC 30
-
Serial number:
see the equipment’s EC declaration of conformity
▪
Fulfills the essential requirements of health and safety of the following directives:
-
Machinery directive 2006/42/EC
-
Electromagnetic compatibility directive 2014/30/EU
