UFREE SCOOTER
www.scooter-manufacturer.com
3
ADJUSTMENTS AND OPERATION
UNFOLDING AND
FOLDING
Your scooter is shipped in
the folded and locked
position. To unfold lift the
Quick Release Handle and
the opposite side. Adjustable
Spring Loaded Handle (fig.
2). Turn the Spring Loaded
Handle. This will allow you
to lift the Handlebars to the
upright position. Lock the
Spring Loaded Handle into
the small round Guide Hole.
Clamp down the Quick
Release Handle. Check for a
secure lock. Reverse this
procedure to fold. There is
Tightness control
Adjustment Nut on the
Spring Loaded Handle.
HANDLEBARS
Insert Grips into Handlebar
T-Frame as shown in fig
3.Be sure that Snap Pins fit
into, and lock the small
holes in the top of the
T-Frame. With the
handlebars in the upright &
locked position, and the
rider standing on the
platform with
ONE FOOT
ON THE BRAKE,
adjust
the Handlebar height to just
below the rider's waistline.
This is accomplished by
loosening the Height
adjuster (fig. 3) while
holding onto the
handlebars ...move the
handlebars to the desire d
height and tighten Height
Adjuster. Be sure Height
Adjuster is tight.
ADJUSTMENT
LIFT QUICK
RELEASE
HANDLE
FIG.2
SNAP PINS
LOWER
GRIPS
HANDLEBA
R T FRAME
LOOSEN
RAISE
TIGHTEN
FIG.3
