background image

UFREE SCOOTER                                          www.scooter-manufacturer.com 

 

INTRODUCTION 
                                                                                                                                                                   

 

Thank you for your purchase of the Electric Scooter. 

The scooter will provide you with hours of fun and help you get some exercise, 

something we all need today. The scooter is an environmentally friendly mode of 

transportation since it is pollution free and whisper quiet. The scooter costs only 

pennies a day to operate and is completely portable with the quick fold mechanism. 

You can store it in the car and take it with you on the train, bus, or ferry! 

Your scooter will provide best results on a smooth and flat terrain. You can always 

assist your scooter, especially on hills, by push kicking like a traditional push 

powered scooter. Please be sure to operate your scooter safely and be aware of 

pedestrians. Be observant of all local and state laws involving scooter usage. 

Pay attention to ALL SAFETY WARNING and CAUTIONS noted within this 

manual. Following these warning and cautions will give you many hours of 

enjoyable and safe riding. 

ITEM IDENTIFICATION 

                                                                                                                                                               

 

 

 

 

 

 

 

TOOLS REQUIRED FOR MAINTENANCE: PHILLIPS 
SCREWDRIVER, FLAT SCREWDRIVER, AND ADJUSTABLE 
WRENCH(S). (All not furnished) 

 

CHARGE BATTERY AFTER EVERY USE

 

 

 

 

ADJUSTABLE 

TENSION DRIVE 

BELT

Before operating, familiarize yourself with these items (see fig. 1):

 

GRIPS

HANDLEBARS

FIG. 1A

SNAP

PINS

110V INPUT, 24V OUTPUT 

BATTERY CHARGER

BRAKE PEDAL AND 

POWER CUT-OFF 

SWITCH

QUICK-RELEASE

FOLDING & LOCKING

MECHANISM 

HANDLEBAR

T-FRAME 

 

HEIGHT 

-ADJUSTER 

DOWN 

TUBE 

REMOVA

BLE PLAT 

STEERING 

ADJUSTMENT 

NUTS 

MOTOR

BATTERY 

COMPARTMENT

FOOT OPERATED 

POWER SWITCH

ALWAYS WEAR A HELMET

Summary of Contents for FS-E07













Reviews: