UFO UFO-L/12, User Manual

Page: 19 / 100

6.2.4 Manual Operation
UFO User Manual & Certificate Of Warranty
15
Control through the main module on the heater:
HO indicator appears on the screen when the heater is switched on and it is in stand by mode.
The 1st digit on the screen illustrates H symbol while 2nd digit illustrates power level mode from
1 to 5.
The button number 1 on the heater functions as ON / OFF . The heater starts operating at the power
level mode at which it has been switched off.
Press the button number 2 on the heater to adjust power mode.
Tilt indicator starts functioning and “2 ” 3 indicator appears on the screen warning through a buzzer
voice when the heater operates in a slope larger than 5 ° . The heater starts operating in stand by
mode ( H0 ) when it has been adjusted in the right position.
H0 appears on the screen when pressed ON / OFF button and the power level mode ( H1 , H2 , H3 ,
H4 and H5 ) is adjusted through the buttons on the remote control.
Press ON / OFF button on the remote control or the heater itself to switch off the heater.
The heater starts functioning in stand by mode after electricity cut.
LED keeps flashing in case of a program set by remote control.
Buzzer signal is given following each command.
LED
Power level indicator
H
ON/OFF
Power mode button