4
3.
The Adjuster Plate can be moved up and down by twisting the spindle and pulling up to decrease or
pushing down to increase to the length of nail
(FIG. 15)
, the Adjuster Plate should be adjusted correctly
to the position indicated inside Lower Nail Housing.
(FIG. 16)
(FIG. 15)
(FIG. 16)
4.
Place a coil of nails over the Lower Nail Housing. Uncoil enough nails to reach the Feed Paw and place
the second nail between the teeth on the Feed Paw.
5.
Close the Nail Housing door and depress the Latch.
6.
Adjust directional EXHAUST deflector so that the exhaust air blast will be directed away from the
operator. Grasp the deflector and rotate it to the desired position for the current application.