Universal Fiber Optics
7
REMOTE RANGE WALK TEST
Once the Illuminator is fully installed carry out a complete range walk test and record the range in the
table below. This information is essential for maintenance purposes to determine if the
range/sensitivity is reducing and also to record dead areas within the Remote Controller’s range due to
RF obstructions and/or RF interference.
NOTE 2:
Where a Illuminator has more than one Remote Control, reduction in operating range may be
experienced when both (or multiple) Remote Controls are used simultaneously.
Description
Date
Max Range
Controller 1
Controller 2
Controller 3
Dead Areas
STANDALONE OPERATION
To disable the remote and revert to manual operation press one of the buttons on the rear of the
Illuminator. The Illuminator will now respond to manual commands from the 2 control buttons as
detailed below
OPERATION
The LED Illuminator has 2 color cycles each with 3 different speed settings as detailed below
Cycle
Color 1
Color 2
Color 3
Color 4
Color 5
Color 6
Color 7
1
White
Red
Orange
Jade
Green
Cyan
Blue
2
Pink
Red
Orange
Jade
Green
Cyan
Blue
