OPERATION
&
MAINTENANCE
11
UFO
LIGHTING
ELECTRICAL
CONNECTIONS
The MetroLED Dimmer unit has two +ve track outputs which are limited to 3 Amps – exceeding
the load on either track will cause the overloaded track to shut down and the overload indicator
LED to illuminate.
Turn the dimming controls and check that the appropriate track dims and brightens.
Plug the mains plug into the electrical supply socket. Switch on power the LEDs on the track will
illuminate. If no light is produced consult the TROUBLESHOOTING section.
MAINTENANCE
Please Note that a record of all maintenance MUST be kept in the table below, indicating what
maintenance was undertaken and when. This MUST be dated for warranty purposes.
Date
Maintenance Undertaken