DMX OPERATION
The DMX light siources can be dimmed remotely (single Channel 0-255 – SEE TABLE
BELOW) and can be addressed manually
Single Channel Value
0
255
Description
LED Off
LED Brightest
Unless the address is specified on the Purchase Order, all light sources will be
defaulted to Address 001. Connect the DMX controller to either of the Mini XLR
sockets, and the light source can now be dimmed. Additional Slave (same address)
DMX light sources can be linked together.
To revert a DMX light source to non DMX control or manual operation:
1. Disconnect the light source from the mains supply.
2. Tilt the light source on its side and remove the screw from the base as shown below.
3. Slide the access cover down to remove and set the cover and screw aside.
4. Switch DIP switch 10 (top) to ON as shown below.
5. Replace access cover and securing screw.
Luna Light Source Range
6
Summary of Contents for LUNA SLP-3000M
Page 15: ...Universal Fibre Optics 15...
