UFO IONIC, Product User Manual

Page: 8 / 16

INSTALLATION
IONIC USER GUIDE
8
ELECTRICAL INFORMATION
Ionic spotlight fittings can be added, removed and moved between tracks as long as the overall
power capacity of the connected power supply unit is not exceeded.
The following tables show the most common configurations of Ionic PSUs / and manual
dimmer and highlight the maximum number of fittings that should be connected for each.
WARNING
Connecting too many Ionic spotlight fittings to a driver, interface or splitter causing excessive
load, or using an underrated 12V PSU, will result in the system shutting down and may cause
damage to the driver circuit.
Always check the maximum output power of the fittings and ensure that based on the
maximum load of the PSU, a suitable number of fittings are connected (see above), and a
correctly rated PSU for the fittings load is selected, prior to powering up the system.
IONIC with Interface and PSU
IONIC SX IONIC MX IONIC LX
Power Consump ti on
1.5W 2.5W 3.0W
Max Fi tti ngs (40W PSU) 25 15 12
Max Fi tti ngs (60W PSU) 35 21 17
Note that the maximum number of fittings may need to be reduced if very long cable lengths
are specified - this is due to voltage drop over the cables length.
IONIC with Manual Dimming Driver
IONIC SX IONIC MX IONIC LX
Power Consump ti on 1.5W 2.5W 3.0W
Max Fi tti ngs 12 8 7