REMOTE
CONTROL
OPERATION
No.
Descrip
ti
on
Func
ti
on
1
Bu
tt
on
Power on
2
Bu
tt
on
Power o
ff
3
Color Ring
Touch control all colors (white not available)
4
Indicator
Indicates controller ac
ti
ve when bu
tt
ons pressed
5
Bu
tt
on
Increase color cycle speed
6
Bu
tt
on
Increase brightness
7
Bu
tt
on
Decrease brightness
8
Bu
tt
on
Decrease color cycle speed
9
Bu
tt
on
[Mode +] Step up through color cycle programmes
10
Bu
tt
on
[Mode
] Step down through color cycle programmes
10
9
8
7
6
5
4
3
2
1
MATCHING
REMOTE
CONTROL
UNIT
TO
ILLUMINATOR
Remove the power plug from the rear of the Light Source, then
replace and touch button 5 within 3 seconds, the Light Source
will “blink” twice slowly indicating that the Remote Controller
is matched to the Light Source.
Once the remote is matched, follow the procedure on page 10
to put the illuminator into remote programme mode. The illu-
minator should then respond to remote commands.
UNMATCHING
REMOTE
CONTROL
UNIT
FROM
ILLUMINATOR
Remove the power plug from the rear of the Light Source, then
replace and touch and hold button 5 within 3 seconds and the
Light Source will “blink” 9 times indicating that the Remote
Controller is unmatched from the Light Source.
OPERATION
7
UFO
LIGHTING
Note:
More than one Light Source controlled by one Remote Controller will
eventually run out of sync with each other (color cycle mismatch
)
