01/2002
Fugenfräse FRÄSMASTER
9
1.0 Technical data
Power supply
. . . . . . . . . . . . . . . . . . . . . .
230 V AC (110 V AC)
Frequency
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
40 - 60 Hz
Power consumption
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
1500 W
Maximum speed
. . . . . . . . . . . . . . . . . . . .
6.000 - 10.000 r.p.m.
Weight
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6,2 kg
Sound pressure level
. . . . . . . . . . . . . . . . . . . . . . . . . .
91 dB(A)
Sound energy level
. . . . . . . . . . . . . . . . . . . . . . . . . .
107 dB(A)
Hand/arm-vibration
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
2,5 m/s²
Max. grooving depth
. . . . . . . . . . . . . . . . . . . . . . . . . .
0 - 5 mm
Grooving blade
. . . . . . . . . . . . . . . . . . . . . . . . .
tungsten tipped
Diameter
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
130 mm
Thickness
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3,8 mm
Number of teeth
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
Tooth formation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
elliptic
2.0
Konformitätserklärung
Wir erklären in alleiniger Verantwortung, dass dieses Produkt
mit den folgenden Normen oder normativen Dokumenten über-
einstimmt: EN 50 144, gemäß den Bestimmungen der
Richtlinien 2006/42/EC
05
Dipl.-Ing. (FH) Dieter Hammel
Konstruktionsleitung
i.V.
WOLFF | Eine Marke der Uzin Utz Gruppe | D-71665 Vaihingen/Enz | Dieselstraße 19
3.0 Safety instructions
Disconnect the power supply before any maintenance is carried
out. Use only the recommended blade and ensure it is sharp
before starting.
Maintenance should be undertaken only by qualified personnel.
Use only genuine WOLFF spare parts.
3.1 Introduction
This operating manual should be used to get the most benefit
from your FRÄSMASTER. Following these instructions will both
extend the life of your machine and reduce repair costs. Please
ensure any user of the machine is fully familiar with the instructions
for use before allowing work to start.
3.2 Danger while working with the machine
The FRÄSMASTER is designed to the highest technical
standards. Incorrect use can be dangerous! Disturbances that
could impair safety, have to be eliminated at once.
Comes with:
Grooving machine
Goggles
Ear protection
Tool kit
Dust bag
Carrying case
Operating manual
When using the grooving machine always wear goggles
and ear protectors supplied. Otherwise you are in danger
of injuring your eyes or your ears.This machine works
at a high speed and these precautions are for your safety!
Use this machine only
as instructed in this operating manual
with the machine in perfect working order.
