!
!
Confidential!/!All!product!specifications!are!subject!to!change!without!notice.!
!
5!
GEE810E-868U
This Status is used for “U-Thing” server
.
•
!
Ping GW –
Display the ping test result to default gateway
PASS (default GW is okay)
FAIL (default GW is unreachable or ICMP-blocked)
•
!
Ping DNS Server – Display the result to ping “8.8.8.8” or “168.95.1.1”
PASS (ping test to ping “8.8.8.8” or “168.95.1.1” is okay)
FAIL (ping test to ping “8.8.8.8” or “168.95.1.1” is failed)
4.2 Set WAN interface
Select [WAN] page for setting WAN configuration
The LoRa service on Indoor GW will start automatically when backhaul connection is ready.
Hence, user needs to take the backhaul (WAN) connection per network environment that
Indoor GW is installed.
4.2.1
Select “Ethernet” as WAN
4.2.1.1 Use DHCP Mode to get IP address automatically
A.
!
Set Primary WAN type as “Ethernet”
B.
!
Set Ethernet IP Type under Ethernet Settings as “DHCP”
C.
!
Press Apply button
4.2.1.2 Use static IP Mode
A.
!
Set Primary WAN type as “Ethernet”
B.
!
Set Ethernet IP Type under Ethernet Settings as “Static”
C.
!
Configure proper settings in IP address / Netmask / Gateway / Primary DNS /
Secondary DNS under Static IP Settings
D.
!
Press Apply button
