UFESA RD1500D, Instruction Manual

Page: 20 / 60

20
technical support service. In order to prevent any risk of danger, do not open the device. Only qualified technical
personnel from the brand´s Official technical support service may carry out repairs or procedures on the device.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for the non-
observance of these warnings.
ASSEMBLY (FIG. 1):
1. To prevent damage, place the radiator upside down on a soft surface (for example a carpet)
2. Fix wheels on two plates with cap nuts. Wheels should be installed between the two first and two last fins.
3. Insert the U-shaped hook into the wheels plate and fix it on the radiator by wing nuts.
4. Turn the heater upright. Wait one minute before to connect the heater to power outlet.
OPERATION:
1. Turn on switch and press to start the setting. The default setting of target temperature is 25 ºC and the heating
setting is II.
2. Press or to adjust the target temperature, 5-35 ºC
3. Press to adjust the heating position (I, II or III).
I 1000 W
II 1500 W
III(I+II) 2500 W
4. Press
to set the 24 hours timer off, “0” means the timer function is off. The indicator light will light up when
this function is activated.
5. Press
for 3 seconds, the screen will be locked, the light will be dim. To unlock the heater, press for
3 seconds again.
6. The heater have heating boost function, press to enter this mode, heater will continuously work for 12 hours,
and the temperature sensor will not work.
Stand by
Heating Boost
24 Hours timer off / Child
lock
Heating setting
Temperature / Timer plus
Temperature / Timer minus
FIG. 3