Features
1
Spray Nozzle
2
Water Tank Cover
3
Steam Control
4
Spray Button
5
Steam Burst Button
6
Auto-Off Light
7
Bend Protector
8
Power Cord
9
Heater Light
10
Water tank
11
Temperature Dial
12
Self-Clean Button
13
Soleplate
14
Water Cup
Before first use
1
Unwind and straighten the
Power Cord
.
2
Fill the tank with water. See the “FILLING THE
IRON WATER” section.
3
Plug in the unit.
First use
1
Proceed as described in the “Before first use”
section.
2
Turn the
Temperature Dial
clockwise to “
●●●
”.
3
The
Heater Light
will come on.
The light will go off once the required
temperature is reached.
4
Set the
Steam Control
to
position.
5
Place the iron in horizontal position or press the
steam burst button. Steam will come out of the holes in
the soleplate.
●
The iron is ready for use.
6
Begin first time ironing with an old towel.
The iron will stop steaming once the
water tank is empty.
A
Ironing
Always follow the ironing instructions
on the garment’s care label.
FILLING THE IRON WITH WATER
●
Unplug the unit.
1
Set the
Steam Control
to
position and lift the
Water Tank Cover
.
2
Using the supplied water cup, fill the tank with
water below the
“max”
level.
For best ironing results, it is
recommended to use fresh
demineralised or distilled water.
Do not use chemically descaled water
or any other liquids.
Never exceed the ‘max’ level marked on
the side of the water tank.
3
Close the
Water Tank Cover
.
DRY IRONING
1
Unwind and straighten the
Power Cord
.
2
Plug in the unit.
3
Set the
Steam Control
to
position.
4
Turn the
Temperature Dial
to “
●
”, “
●●
” or “
●●●
”.
5
The
Heater Light
will come on.
The light will go off once the required
temperature is reached.
●
The iron is ready for use.
STEAM IRONING
1
Proceed as described in the “Before first use” section.
2
Turn the
Temperature Dial
to “
●●
” or “
●●●
”.
For optimum steam quality, do not set
the Temperature Dial to “
●
” position for
steam ironing.
B