UFESA PP5500, Instruction Manual, Page: 14 / 43

14
and contact an authorized Technical support service.
In order to prevent any risk of danger, do not open the device. Only qualified technical
personnel from the brand´s Official Technical support service may carry out repairs
or procedures on the device.
Any incorrect use or improper handling of the product shall render the warranty null
and void. Only an authorized technical support service center may carry out repairs
on this product.
Connect the device to a mains supply with a 0,5 Ohm maximum impedance.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals
or objects, for the non-observance of these warnings.
INSTRUCTIONS FOR USE
Plug in the straightener in order to turn it on. OFF will appear on the screen
Press the power button (C) for 2-3 seconds and the temperature at which the
straightener starts up will appear. Choose the one you wish by pressing the
temperature control buttons (D) where the temperature will flash until the option
selected is reached, then remaining still.
If you wish to lock the temperature in order for it not to move while using
straightener, press the on button twice and a lock will appear on the screen.
Unlock it by pressing it again twice, after which time the lock disappears.
Turn off the straightener by pressing the on button for about 2-3 seconds. OFF will
appear on the screen and then disappear from the screen. You can still disconnect
the straightener from the socket and store it in the heat resistant case-mat.
For straightening (Fig.1), separate the hair layers and take each layer from below
from near the root and moving it all the way down in this manner until you arrive
at the top.
How to make your hair wavy or curly (Fig. 2), separate your hair into layers and
take each lock, placing the tips of each lock between the straightener, turning
the straightener until twisted around the straightener, waiting a few seconds, then
pulling the straightener down gently.